160Kwh Storage Battery Systems For Home Energy Storage , CE ROHS Approval

Storage Battery Systems 160Kwh For Home Energy Storage , CE ROHS Approva

specification :

voltage range :500V-730V(640Vplatform)
Battery system total power(KWh)23±2℃,1/3C :179.2kWh 90%DOD 161
Battery pack capacity (Ah)23±2℃,1/3C :280Ah
single battery cells tolerance (Ah)   ≤1Ah
battery cells model :       SEPFe80125256-20Ah
configuration     :  14P200S
Recommended operation enviromental range (℃) :    discharge :-20~60,charge :0~45
Humidity   :      5%~95%
storage temperature
                          -20~25℃(3-6month,50%SOC)
                           -20~45℃(1-3month,50%SOC)
                           -20~60℃(1 month,50%SOC)
continuous charge current :      ≤140A
max continuous charge current :    ≤140A
max discharge power(15s) :    200kW
continuous discharge current (60min):    ≤140A
insulation resistance (Ω):    ≥200MΩ
Protection level :         IP20
cooling system  :           air cooling

Operation Enviroment paratmeters

Envrionmental item parameters
Altitude    ≤4500m
installation  :at  house 
working temperature range : -20℃-55℃
Humidity : 10%~90%RH,without  condensation
Antiseimic(according IEC61166 to test ,safety ratio 1.67) :   horizontal acceleration g 0.2     Vertical acceleration 0.1

Energy storage system function introduction :

1.Balance  function , prevent  the battery cells  voltage  unbalance ,lengthen the battery pack lifespan .

2. singel battery cell voltage detection,and provide  exact  over charge and discharge data to protect voltage 

3. battery module multipoint temperature data conllection ,provide the same quantity temperature data conllection  as voltage ,stricly monitor battery temperature is unformity to lengthen the battery pack life span .

4. estimate each battery pack distribute SOC ,support  the each battery pack power controll ,increase the battery system module available capacity and lifespan .

5.high precision current detection to provide the basically for SOC estimation ,protect  the battery from the over charge current 

6.three layer module structure can meet with differenece voltage and capacity  battery pack demand 

7.the system inner data transmission use the CAN 2.0 high speed BUS interface.

8.provide many kinds of communication connector to connect  internet ,include RS485,CAN,RS232 .

   BMS functions: 

the first protection:

1.battery cells over charge and discharge alarm

2.battery cell over temperature alarm.

3. instantaneous high temperature alarm

4.over teperature difference alarm

Application :

Energy storage station ,home energy storage ,Emergency power supply ,Smart microgrid  , power grid frequency regulation ,distributed energy sources system 

.